Vehicle Graphics Care - MG MG3 Owner's Handbook Manual

Note: DO NOT scrape or use abrasive cleaners on the
inside of the rear screen – this will damage the heating
elements.
Mirrors: Wash with soapy water. Use a plastic scraper to
remove ice. DO NOT use abrasive cleaning compounds
or metal scraper.
MAINTENANCE

Vehicle Graphics Care

Wash Regularly
Wash whenever the vehicle appears dirty. Contaminants
allowed to remain on the vehicle graphics may be more
difficult to remove during cleaning. Rinse off as much dirt
and grit as possible with a low pressure spray of water.
Use a wet, non-abrasive detergent such as 3M™ Car Wash
Soap 39000 or Meguia's NXT Generation® Car Wash, or
Deep Crystal® Car Wash and a soft, clean cloth or sponge.
Rinse thoroughly with clean water.
spotting, immediately use a silicone squeegee to remove
water (taking care around the edges of the graphics) to
remove water and finish with a clean microfiber cloth.
Automated Car Wash
Brush-type car washes are not recommended as they can
abrade the graphics and cause the edges to lift or chip, as
well as dulling the graphic's appearance.
To reduce water
7
209