Setup; Installing R/C Radio Module - TBS TANGO FPV REMOTE Manual

Setup

Installing R/C radio module

A JR-compatible radio module needs to be installed in the slot of the back of the remote. The CROSSFIRE
transmitter module is recommended, as it utilizes the latest CRSF-protocol, but any transmitter module with
PPM stream will work as well.
Check the TBS CROSSFIRE transmitter module manual for further details on setting up and configuring it.
Next, to make the radio recognizes the module (it does not auto-detect), you need to enter the configuration
menu and update the model to the right RF module type to either regular PPM, TBS Crossfire or FrSky XJT.
12