Drone Menu; Remote Menu - TBS TANGO FPV REMOTE Manual

Drone menu

Remote menu

Specific profile for the model you are controlling
• Back ​ - Return to previous menu
• Name ​ - Unique name for the model profile
• Type ​ ​ [ CleanFlight, DJI NAZA, PixHawk,
OP-Taulabs] ​ - Flight controller used on the
model, allows further switch/dial mapping on
supported FCs (DJI/PX)
• SW E ​ [ANG, SPD]
mapped to the SW E dial on the remote, angle
(ANG) or speed (SPD)
SW F ​ [ANG, SPD]
•
mapped to the SW F dial on the remote, angle
(ANG) or speed (SPD)
Specifics about the remote itself
• Back ​ - Return to previous menu
• Stick Mode ​ [1 to 4]
maps throttle, yaw, pitch and roll to the gimbals
- Mode 2 is most common
• RF Module ​ [ Standard PPM (10Ch), TBS Crossfire
(10Ch), FrSky XJT (8Ch)] ​ ​ - Radio module plugged
into the radio, dictates the communication
protocol and PPM channel size
Idle Warn ​ [ON, 5 to 30min, OFF]
•
remote is left powered on without any input
after a specific amount of time, sound an alarm
Home CH ​ [Band, Channel (1 to 8)]
•
video channel to tune into after long pressing
the UP-button (VRX controls)
• SW Speed ​ ​ [ 1 to 15]
SW F dial, if SW is set to angle (ANG)
10
​ ​
- (DJI, PX) Specify the function
​ ​
- (DJI, PX) Specify the function
​ ​ - Stick allocation mode,
​ ​
- When the
​ ​
- Default
​
- Set the speed of SW E and