Maintenance Schedule - GMC Yukon XL Denali Owner's Manual

Hide thumbs Also See for Yukon XL Denali:
Table of Contents

Advertisement

Maintenance
Schedule
Owner Checks and Services
At Each Fuel Stop
Check the engine oil level. See
Engine Oil on page 10 8.
Once a Month
Check the tire inflation
pressures. See Tire Pressure on
page 10 51.
Inspect the tires for wear. See
Tire Inspection on page 10 56.
Check the windshield washer
fluid level. See Washer Fluid on
page 10 23.
Engine Oil Change
When the CHANGE ENGINE OIL
SOON message displays, have the
engine oil and filter changed within
the next 1 000 km/600 mi. If driven
under the best conditions, the
engine oil life system might not
indicate the need for vehicle service
for more than a year. The engine oil
and filter must be changed at least
once a year and the oil life system
must be reset. Your trained dealer
technician can perform this work.
If the engine oil life system is reset
accidentally, service the vehicle
within 5 000 km/3,000 mi since the
last service. Reset the oil life
system when the oil is changed.
See Engine Oil Life System on
page 10 10.
Service and Maintenance
Tire Rotation and Required
Services Every 12 000 km/
7,500 mi
Rotate the tires, if recommended for
the vehicle, and perform the
following services. See Tire
Rotation on page 10 57.
Check engine oil level and oil
life percentage. If needed,
change engine oil and filter, and
reset oil life system. See Engine
Oil on page 10 8 and Engine Oil
Life System on page 10 10.
Check engine coolant level. See
Engine Coolant on page 10 16.
Check windshield washer fluid
level. See Washer Fluid on
page 10 23.
Visually inspect windshield wiper
blades for wear, cracking,
or contamination. See Exterior
Care on page 10 88. Replace
worn or damaged wiper blades.
See Wiper Blade Replacement
on page 10 31.
11-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yukon denali

Table of Contents