Washer Fluid Messages - GMC Yukon XL Denali Owner's Manual

Hide thumbs Also See for Yukon XL Denali:
Table of Contents

Advertisement

5-44
Instruments and Controls
If the disconnect occurs while
the vehicle is moving, this
message stays on until the
ignition is turned off.
There is a short in the wiring to
the electric trailer brakes.
When this message displays, power
is no longer available to the trailer
brakes.
As soon as it is safe to do so,
carefully pull the vehicle over to the
side of the road and turn the ignition
off. Check the wiring connection to
the trailer and turn the ignition back
on. This message clears if the trailer
is reconnected. This message also
clears if you acknowledge it. If this
message still displays, either the
vehicle or the trailer needs service.
See your dealer.
See Integrated Trailer Brake
Control System under Towing
Equipment on page 9 63 for more
information.
ICE POSSIBLE DRIVE
WITH CARE
This message displays when ice
conditions are possible.
TRAILER CONNECTED
On vehicles with the Integrated
Trailer Brake Control (ITBC) system,
this message displays briefly when
a trailer with electric brakes is first
connected to the vehicle.
This message clears itself after
several seconds. This message also
clears if you acknowledge it. After
this message clears, the TRAILER
GAIN/OUTPUT display appears in
the DIC.
See TRAILER GAIN/OUTPUT
under Driver Information Center
(DIC) on page 5 26 and Integrated
Trailer Brake Control System under
Towing Equipment on page 9 63 for
more information.

Washer Fluid Messages

WASHER FLUID LOW ADD
FLUID
This message displays when the
windshield washer fluid is low. Fill
the windshield washer fluid reservoir
as soon as possible. See Engine
Compartment Overview on
page 10 6 for the location of the
windshield washer fluid reservoir.
Also, see Washer Fluid on
page 10 23 for more information.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yukon denali

Table of Contents