GMC Yukon XL Denali Owner's Manual page 194

7-4 Infotainment System
Using the Radio
O
(Power/Volume): Press to turn
the system on and off.
Turn clockwise or counterclockwise
to increase or decrease the volume.
4
(Information) (If available):
Press to switch the display between
the radio station frequency and the
time. While the ignition is off, press
this button to display the time. Press
to display additional text information
related to the current FM-RDS or
XM station; or CD, MP3, or WMA
song. If information is available
during XM, CD, MP3, or WMA
playback, the song title information
displays on the top line of the
display and artist information
displays on the bottom line. When
information is not available, NO
INFO displays.
Noise Compensation
Technology: Vehicles with a Bose
Audio System include the Bose
®
AudioPilot noise compensation
technology. When turned on,
AudioPilot continuously adjusts the
audio system equalization, to
compensate for background noise,
so that music always sounds the
same at the set volume level.
This feature is most effective at
lower radio volume settings where
background noise can affect how
well the music is heard. At higher
volume settings, where the music is
much louder than the background
noise, there might be little or no
adjustments by AudioPilot.
To activate:
1. Set the radio volume to the
desired level.
2. Press the MENU button to
display the radio setup menu.
3. Press the softkey under the
AUTO VOLUM tab on the radio
display.
4. Press the softkey under the ON
tab. The display times out after
approximately 10 seconds.
For additional information on
AudioPilot, please visit
www.bose.com/audiopilot.
Setting the Tone
(Bass/Midrange/Treble)
BASS/MID/TREB (Bass, Midrange,
or Treble): To adjust the bass,
midrange, or treble:
1. Press the knob until the tone
control tabs display.
2. Highlight the desired tone
control tab by doing one of the
following:
Pressing the
Press the softkey under the
desired tab.
3. Adjust the setting by doing one
of the following:
Turn the knob clockwise
or counterclockwise.
Press the SEEK, or
SEEK button.
\
Press the FWD, or
s
REV button.
knob.