Table of Contents
Advertisement
Listing Stored Numbers
The list command will list all stored
numbers and name tags.
Using the List Command
1. Press and hold
/
two seconds.
2. Say Directory.
3. Say Hands Free Calling.
4. Say List.
Making a Call
Calls can be made using the
following commands.
Dial or Call: The dial or call
command can be used
interchangeably to dial a phone
number or a stored name tag.
Digit Dial: This command allows a
phone number to be dialed by
entering the digits one at a time.
Re dial: This command is used to
dial the last number used on the cell
phone.
Using the Dial or Call
Command
1. Press and hold
two seconds.
2. Say Dial or Call.
for
3. Say the entire number without
pausing, or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Using the Digit Dial Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
Infotainment System
To hear all of the numbers
recognized by the system, say
Verify at any time.
/
for
1. Press and hold
two seconds.
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say Dial.
Once connected, the person called
will be heard through the audio
speakers.
Using the Re dial Command
1. Press and hold
two seconds.
2. After the tone, say Re dial.
Once connected, the person called
will be heard through the audio
speakers.
7-43
/
for
/
for
Advertisement
Chapters
Table of Contents
