Using Bluetooth: Pairing Your Device - iHome iBT9 Instruction Manual

Using Bluetooth: Pairing Your Device

Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT9. Once your device is paired,
the iBT9 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and
2. Press and hold the
3. To pair with a different Bluetooth device, or at a different time, make sure unit is
make it "discoverable" by turning on Bluetooth mode (check in Options or Settings).
Power Button for 2 seconds to turn on the iBT9. The first
time the unit is turned on it will enter auto pairing mode: ascending tones will
sound and the indicator light on the front of the unit will flash blue while the unit
attempts to pair. "iHome iBT9" should appear on your device's menu. Select
"iHome iBT9" on device to begin/complete pairing. If your device asks for a
password, enter 1234 on the keyboard of your device. A tone will sound and
the blue indicator will glow solid. If no device is paired within 3 minutes, the unit
will revert to its previous state.
powered on, then press and hold the
unit) for 2 seconds. Select "iHome iBT9" on device to begin/complete pairing.
Bluetooth Button (located on top of the
9
iBT9
Using the