Using Bluetooth: Pairing Your Device - iHome iBT37 Instruction Manual

Pairing Your Device
Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT37. Once your device is
paired, the iBT37 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make
it "discoverable" by turning on Bluetooth mode (check in Options or Settings).
2. Press the
enter auto-pairing mode and attempt to connect to a Bluetooth device. Otherwise, follow
step 3 to begin pairing.
3. Press and hold the
The unit will beep twice and the status indicator LED will flash blue, indicating the unit is in
pairing mode.
4. "iHome iBT37" should appear in your device's Bluetooth menu. If "Not Paired", "Not Connected" or
similar message appears, select "iHome iBT37" to connect it. If prompted for a passcode, enter "1234"
on your device's keypad.
iHome iBT37
For iPhone
5. If pairing is successful, a tone will sound and the Bluetooth indicator light will glow solid, indicating the
iBT37 is ready to play music. There should also be an indication on your device. If no device is successfully
paired within 3 minutes the iBT37 will default to previous mode. Once the iBT37 is paired to a device,
it will attempt to autolink when the device is within range (about 30 feet).
Power Button to turn on the iBT37. The first time the unit is powered on, it will
Talk/Pairing/Play/Pause Button on the right of the unit for 2 seconds.
iHome iBT37
Using the
iHome iBT37
For other
6
iBT37
iHome iBT37