Switching The Input Source Quickly - NEC PlasmaSync 42XM5 PX-42XM5G User Manual

Side-by-Side
S BY S1
RGB1
or
S BY S2
RGB1

Switching the input source quickly

This feature enables quick input selection.
After setting ON, press the CLEAR/SEAMLESS SW
button for quick switching between the two selected input
signals.
Example: Set to switch quickly between RGB1 and
RGB2.
On "SEAMLESS SW" of "OPTION4" menu, select "ON".
Select "RGB1" and "RGB2".
SUB. PICTURE
ZOOM NAV
PIC FREEZE
SEAMLESS SW
SELECT1
SELECT2
TEXT INSERT
* The available sources depend on the settings of input.
Information
SEAMLESS SW Function
* This feature will not function for certain input
combinations. See the table on page En-16.
* After switching to the selected input, please operate this
function.
* This feature will not function during split screen mode.
* When SEAMLESS SW is first turned on, or when
signals being transmitted are changed, there may be a
slight delay due to signal analysis.
SEAMLESS SW settings
OFF: Turns off the SEAMLESS SW function.
ON: When the CLEAR/SEAMLESS SW button is
pressed, input signals will switch quickly according to
the setting of SELECT1 and SELECT2.
Downloaded From TV-Manual.com Manuals
Picture-in-Picture
RGB1
SELECT/
FREEZE
button
RGB1
RGB1
RGB1
OPTION 4 4 / 4
PREVIOUS PAGE
: BTM LFT
: S BY S1
: ON
: RGB1
: RGB2
: OFF
SEL. ADJ. EXIT RETURN
Displaying the information as a text
Example: Setting "TEXT INSERT" to "BOTTOM-3",
RGB1
"INPUT" to "RGB1", "SUB. P DETECT" to "AUTO",
"PIC. RATE" to "100%" and "DISPLAY" to
"NORMAL"
On "TEXT INSERT" of "OPTION4" menu, select
SELECT/
"BOTTOM-3", then press the MENU/ENTER button.
FREEZE
button
The "TEXT INSERT" screen appears.
Adjust the items.
RGB1
TEXT INSERT
INPUT
SUB. P DETECT
PIC. RATE
DISPLAY
SEL. ADJ.
Information
TEXT INSERT setting
OFF: Displays no text.
BOTTOM-1/BOTTOM-2/BOTTOM-3/MID.LOW/
MID.HIGH/TOP-3/TOP-2/TOP-1/LEFT/RIGHT:
Displays a text at the specified location, where the
subscriptions -1, -2 and -3 indicate the height of the
text area.
INPUT setting
Sets the input of the text to the RGB1 to 3.
SUB. P DETECT setting
AUTO: Black frame with no signal input disappears
3 seconds after the input signal is lost.
OFF: Black frame with no signal input is displayed
consistently.
PIC. RATE setting
Sets the transparency of the text.
DISPLAY setting
NORMAL: The sub screen is displayed consistently.
FADE: The sub screen fades in.
En-36
: RGB1
: AUTO
: 100%
: NORMAL
EXIT RETURN
Enhanced split screen Model