Unpacking & Assembly - Garden Trax Y4007 Instructions Manual

UNPACKING & ASSEMBLY
Unpack your unit by carefully li ing it out of its container. Remove any packing material and cut any plas c
es holding the handlebar pieces to the rest of the assembly
ASSEMBLY
Stand the mini cul vator assembly upright
1.
with nes and wheels on a level surface.
Wheels should be set in the lowest posi on.
DO NOT place the mini cul vator on a high
surface where it can fall and cause property
damage or personal injury
Using two tee handle nuts, two bolts and two
2.
curved washers,
handlebar to the lower handlebar that is
already a ached to the mini cul vator
assembly. (SEE FIGURE 1) The middle
handlebar can be installed in two posi ons
one high and one low.
TIGHTEN THE TEE HANDLE NUTS
A ach the upper right and le handlebars to
3.
the middle handlebar
remaining tee handle nuts, bolts, and curved
washers. (SEE FIGURE 1)
TIGHTEN THE TEE HANDLE NUTS
TOLL FREE HELP LINE 1 855 691 5969
assemble the middle
DO NOT OVER
using the two
DO NOT OVER
MODEL Y4007
MINI CULTIVATOR AND DETHATH
Y4000.02.01
Y4000.02-04A
Y4000.07
FIGURE 1
ER
BOLT，HANDLE CLAMP
WASHER
Y4000.02-02A
Y4000.02-03A
Y4000.02.01
WASHER
BOLT，HANDLE CLAMP
8