Related Manuals for Qtx DUET300
Summary of Contents for Qtx DUET300
- Page 1 DUET300 Compact PA System with USB/SD & Bluetooth™ Order ref: 178.190UK User Manual VERSION 1.0...
- Page 2 Introduction Thank you for choosing the DUET300 compact PA system, which has been designed to provide a convenient sound solution for a wide range of applications. Please read this manual fully to understand the various features included and get the best results from this product.
- Page 3 Setting up After unpacking the DUET300 system, stand the speaker cabinets on a stable surface and slide the catch on top sideways to release each of the rear modules one at a time. Unclip the powered mixer module and accessory compartment from the rear of each speaker cabinet and place them with the rear side downwards.
-
Page 4: Operation
The L+R RCA output and headphones output are not affected by the Monitor Output Volume control. When the unit is not in use, turn down the Master Volume and Monitor Output Volume controls before powering down in order to avoid damage to the DUET300 and other connected equipment. 178.190UK User Manual... -
Page 5: Specifications
Internal USB/SD player & Bluetooth receiver The DUET300 onboard media player can play back files from USB/SD media or a paired Bluetooth device. Insert a USB memory stick or an SD card with compressed digital audio files stored on it into the relevant slot on the top panel. -
Page 6: Troubleshooting
Troubleshooting Check power is switched on at the mains and at the rear panel Power LED is not lit Check IEC fuse – if blowing fuses, refer to qualified service personnel Check input signals and condition of connection leads Power LED is on but no other Check channel gain and EQ controls are not turned fully down LEDs and no output Check Master and channel level controls are not fully down...