Ap1 Regulations - GAH S40/65 User Manual

AP1 Regulations
13 13 13 13
13
68
AP1-1 Building Regulations
The following Standards and Codes of Practice should be considered when installing
Thermecon Boilers.
BS5449 - 1990
BS5410 Part 1:1977
BS5410 Part 2:1978
BS4543 Part 1 & 3:1976
Current Building Regulations:-
Part J J J J J England and Wales
Part F F F F F Scottish Regulations
Technical Booklet L L L L L Northern Ireland
Oil Boilers with Conventional Flue installed in rooms where there is an Extractor Fan, the
following Building Regulations apply:-
Part F F F F F England and Wales (also recommended in Northern Ireland)
Part K K K K K Scotland
The Control of Pollution (Oil) Regulations
AP1-2 OFTEC
OFTEC publish Technical Books that summarise and illustrate the requirements of the
above Standards and Regulations.
OFTEC Oil Firing Technical Association
Foxwood House,
Dobs Lane,
Kesgrave,
Ipswich.
IP5 2QQ
www.oftec.org email:- enquiries@oftec.org
AP1-3 Electrical Regulations
All wiring should be to IEE Wiring Regulations 16th Edition.
AP1-4 Oil Tanks
Plastic tanks are covered by OFTEC standard OFS T100.
Refer to BS5410 Part 1 and OFTEC Technical Book 3 for further information on tank
installation.
Steel tanks should be manufactured to BS799 Pt 5.
Forced Circulation Hot Water Central
Heating Systems for Domestic Use.
Oil installations up to 45kW
Oil installations over 45kW
Factory made insulated chimneys.
APPENDIX APPENDIX APPENDIX APPENDIX APPENDIX