Roland MC-909 Getting Started Manual page 43

®ÂØÒňΠMC-909
3. Press ENTER to display the System Menu screen.
4. Press F4 (Sampling) to display the System/Sampling screen.
5. Select the samples you'd like the MC-909 to load at startup. To load:
• the factory preset samples—set Preset Default Load to On.
• all of the samples in user memory and on the currently installed SmartMedia card—set Sample
Default Load to On.
Note that when you turn on Sample Default Load, all of the samples from both user memory
and your SmartMedia card are loaded. There's no way to automatically load user memory or
the contents of a card separately.
It only makes sense that you shouldn't try and load more stuff into the live sample
memory than you've got room for. If your live sample memory is only 16 MB, and you try
to automatically load all of the contents of user memory and a 128 MB SmartMedia card—
duh—it's not going to work. Take care to automatically load only what will actually fit into
your live sample memory. Of course, the larger your live sample memory—which you can
expand by adding DIMM chips—the less of a problem this'll be.
6. When you've finished setting the desired parameters, press F6 (System Write) to confirm your
changes.
7. Press EXIT to return to the Pattern Play screen.
©
2003 Roland Corporation U.S.
Getting Started Guide
MC-909 Getting Started Guide Page 43