Roland MC-909 Getting Started Manual page 20

®ÂØÒňΠMC-909
The MC-909 presents its Pattern Name screen.
Whenever you save something on the MC-909, you can name it on a screen that looks just
like this one.
Names in the MC-909 can have up to 16 characters in them. Each character has a position on the
display, which is shown by an underline. (Right now, the first character position is underlined.) You
create the name you want by selecting each of its character positions and dialing in the desired
letter, number or punctuation mark.
Let's name this pattern "Get Started!"
1. Turn the VALUE dial to select a capital "G. "As you turn the dial, you can see the available
characters swing in and out of view.
2. Press
3. Dial in a lower-case "e."
©
2003 Roland Corporation U.S.
Getting Started Guide
once to select the second character position.
MC-909 Getting Started Guide Page 20