Warranty - TERMA KTX 1 User Manual

WARRANTY

Warranty Terms & Conditions
1. The subject of this warranty is microprocessor-equipped controller for KTX heating
elements, which uses the TERMA-SPLIT system. Product name and characteristics are
specified on the packaging.
2. By accepting the device on purchase, the Client confirms that the product is of full
value. The Client should immediately inform the Seller of any discovered faults –
otherwise it will be understood that the Product was faultless at the time of pur-
chase. This refers especially to any faults or damages of the control panel case.
3. Warranty period for the Product is 24 months from the date of purchase, but no
longer than 36 months from date of production.
4. Any claims made will be processed on production of the warranty card and the
evidence of purchase. Manufacturer has the right to reject any claim on the grounds
of not presenting of any of the above documents.
5. This warranty does not comprise any faults that are due to:
– incorrect (not in accordance with the manual) installation, use or disassembly,
– incorrect use of the heating element (ie. for any purpose that is not specified by
the Manufacturer as intended for this type of product),
– Product being handled by unauthorized persons,
– any faults or damages caused by the Client after having purchased and accepted
the Product.
6. Central heating installation should be fitted with lock-shield valves, enabling disas-
sembly of the radiator or the heating element and its control head without the neces-
sity of emptying the whole system of the heating agent. Any problems or expenses
arising from lack of such valves in the installation cannot not be used as the grounds
for any claims against Terma.
7. The attached Product Manual is an integral element of the Warranty. Please read it
carefully prior to the Product installation and use.
8. The Manufacturer is obliged to remove any production fault within 14 working days
from receipt of the faulty device to Manufacturer's premises.
9. Should the repair turn out impossible, Manufacturer is obliged to replace the faulty
Product with a new, full-value unit of identical parameters.