To send a call waiting
PT/SLT/PS
While hearing a busy tone
1
Enter 1 .
For a called extension
A call waiting tone is sent to the busy extension user to notify him or her that a new incoming call is waiting
(1.3.13 Call Waiting Tone). The extension can then answer the second call by either disconnecting the
current call or placing it on hold.
Answering Call Waiting in the PBX
During a conversation, a call waiting tone through the speaker or the handset occurs when an outside call
has been received or another extension is letting you know a call is waiting. You must activate this feature
to use it. (Default: Enable—Tone)
You can answer the second call by disconnecting (1) or holding (2) the current call.
1. To disconnect the current call and then talk to the new party
PT/SLT/PS
While hearing a tone
On-hook.
Off-hook.
2. To hold the current call and then talk to the new party
PT/PS
While hearing a tone
Press HOLD .
Talk to the
new party.
(CO)
OR
Press CO or
INTERCOM .
Disregard this step if both
parties are extensions.
1.3 Telephone Features and Operation
Talk to the
new party.
Operating Manual
39