Listening To Radio Broadcasts; Tuning In To A Station; Program Radio Stations; To Change The Fm Reception Mode - Kruger&Matz KM1533 Owner's Manual

Hi-fi audio system with cd, usb
Table of Contents

Advertisement

Available languages

Available languages

Listening to Radio Broadcasts

Caution: Before listening to the radio, please check that the FM Antenna is correctly
connected and adjusted for length and direction.

Tuning in to a Station

1. Repeatedly press the source button (SOURCE) on the unit or directly press the tuner
function button (
- The word "TUNER" will be displayed on the front panel.
2. Select a station using one of the following methods.
• Auto Tuning
Press and hold the tuning backward/forward button ( /
backward/ forward button (
frequency changes down or up automatically until a station is found.
• Manual Tuning
Repeatedly press the tuning backward/forward button ( /
backward/ forward button (
you find the station you want.
• Preset Tuning (Available only after the stations are preset)
Repeatedly press the preset up/down button (
number. Its band and frequency are displayed on the front panel.

Program radio stations

You can program a maximum of 20 preset radio stations (FM).
• Automatically
Press and hold the programme button (PROG) on the remote control for two second
or more to activate automatic program mode.
- [AUTO] is displayed.
- All available stations are programmed.
- The first programmed radio station is broadcast automatically.
• Manually
1. Tune to a radio station.
2. Press the programme button (PROG) on the remote control to activate program
mode.
- The preset number will blink.
3. Press the
Note: If you select more than 20, the preset number will be changed to "1"
automatically.
4. Press the programme button (PROG) on the remote control again to store the
station.
5. Repeat above steps 1 to 4 for each station you want to store in memory with a
preset number.
Note: If the system is unplugged or if a power failure occurs, the preset stations will not
be erased.

To change the FM Reception Mode

Press the stereo/mono select button (MODE) on the remote control to select the Stereo
or Mono channel to receive the best FM reception mode.
42
Owner's manual
) on the remote control to select tuner source.
/
) on the remote control for one second or more, the
/
) on the remote control to change the frequency until
/
button to allocate a number to this radio station.
) on the unit or tuning
) on the unit or tuning
/
) to select the desired preset

Advertisement

Table of Contents
loading

Table of Contents