Resetting The Safeguard - WMF 150 F User Manual

3.7

Resetting the safeguard

> Do not change the built-in safety devices.
> Allow the machine to cool down.
> Do not supply this machine through an external
switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the
utility to avoid a hazard due to inadvertent reset-
ting of the thermal cut-out.
> If the dry-boil protection triggers because of the
increased scale deposits, descale the machine.
Follow the descaling instructions in chapter 5
Maintainance.
This machine is fi tted with a dry-boil protection. This
protection triggers if the heating element overheats because
of a fault. When the fault has been resolved, the dry-boil
protection can be reset at the back of the machine. The most
common cause of the dry-boil protection being triggered, is
not descaling the heating system in time.
If the heating system does not switch back on, do as follows:
► Unscrew the protective cap
► Press the button [2].
► Replace and tighten the protective cap [1].
48
[1] to remove it.
CAUTION
2 1
User Manual WMF 150 F