Menu Settings; Setting Of The Amount Of Coffee; Setting The Display To Show Cups Or Litres - WMF 150 F User Manual

3.

Menu settings

3.1 Setting the amount of coffee
Burn hazard / scalding hazard
• Make sure that you set the correct coffee quantity.
If the set coffee quantity is too high, the jug will
overfl ow.
• The manufacturer is unable to accept any liability
for the consequences of altered settings.
The machine is factory-set to brew coffee using 2.0 litres of
water (16 cups). You can adjust the quantity as follows:
Press the selection button
►
► Press the start/stop button
number shows in the display.
► Release the buttons. The display shows the set program
(*factory setting).
Program Water
volume
02* 2040 ml
01 1520 ml
00 1000 ml
► Press the selection button
number.
► Wait 10 seconds. The setting has been saved.
44
[1] and hold it.
[2] one time. The program
Display
Litres Cups
2.0 16
1.5 12
1.0 8
[1] to increase the program
WARNING
Safety instructions
Read the chapter Safety, page 25
1 2
START
+
STOP
1
... x
User Manual WMF 150 F