Unpacking And Checking Contents; Tools Needed; Unpacking - RIDGID DP1550 Owner's Manual

Unpacking and Checking Contents

Tools Needed

Medium Screwdriver
Adjustable Wrench
Phillips Screwdriver
Combination Square

Unpacking

WARNING: For your own safety,
never connect plug to power
source outlet until all assembly
steps are complete, and you
have read and understood the
safety and operating instruc-
tions.
The Drill Press is shipped complete in one
box.
1. Separate all "loose parts" from packing
materials and check each item with
illustration and "Table of Loose Parts."
WARNING: To reduce the risk of
injury, if any parts are missing,
do not attempt to assemble the
drill press, plug in the power
cord, or turn the switch on until
the missing parts are obtained
and installed correctly.
Combination Square Must be True
Draw Light
Line on Board
Along this Edge
Framing
Square
Should be no Gap or Overlap when Square
is Flipped Over in Dotted Position
2. Remove the protective oil that is applied
3. Apply a coat of paste wax to the table
NOTE: Make
accounted for before discarding any pack-
ing material.
10
to the table and column. Use any ordi-
nary household type grease and spot
remover.
WARNING: To reduce the risk of
fire or toxic reaction, never use
gasoline, naptha
highly volatile
remove protective oil.
and column to prevent rust. Wipe all
parts thoroughly with a clean dry cloth.
certain all items are
Straight Edge of
Board 3/4" Thick
This Edge Must be
Perfectly Straight
or similar
solvents to