Suitable Harnesses - Advance acoustic IOTA 23 User Manual

The I OTA speed system is arranged so that the profile shape of the
wing is fully retained over the angle-of-attack range of the speed sys-
tem . This maintains the beneficial qualities of the profile at high speeds .
Caution: The speed system is correctly adjusted when you can
use the full travel available on the risers . Make certain that the
speed lines are not set too short, thus causing the wing to be
pre-accelerated all the time .

Suitable harnesses

Basically the I OTA can be flown with any harness that does not have
rigid cross bracing ( see section «Certification» ) .
The chosen harness should ideally have a carabiner distance of ca . 45
cm and a support height of between 40 and 48 cm .
Info: Experience has proved the theory – a streamlined harness
can significantly improve gliding performance .
The I OTA was specially trimmed for use with a streamlined harness .
For this reason we recommend a harness with speedbag in order
to get the best out of the I OTA's great performance . The ADVANCE
IMPRESS or LIGHTNESS harness is particularly suitable since the
I OTA was designed and tested with them in mind .
11