GBC 100E Electric Velobinder Operating Instructions page 5

DEBIND (FIGURE IV)
1. To remove or add pages to your bound document, use the small hook, labeled
"debind", on the end of the VeloBinder® tool. Place the document on a flat
surface, face down. Insert the debinding tool hook firmly into the slotted strip at
the "point" of each pin and gently flip up the pin points.
2. Straighten all; pins so they're perpendicular to the slotted strip.
3. Remove slotted strip and add or subtract sheets as desired.
REBIND
Pages may be removed and new pages inserted repeatedly. To rebind, simply follow
"Insert" and "Snap" steps.
5