Audio Dubbing - Sony SLV-X837AS Operating Instructions Manual

Audio dubbing

This feature lets you record over the
normal audio track. The monaural
sound previously recorded is replaced
while the original hi-fi sound remains
unchanged. Use this feature to add
commentary to a tape that you have
recorded with a camcorder.
Before you start dubbing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT to display "L2"
in the display window.
1
Insert a source tape into the stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.
2
Open the drop down panel and insert a prerecorded tape into this
(recording) VCR. Search for the end of the section to be replaced and
press P PAUSE.
Make sure that the tape has its safety tab in place.
3
Press COUNTER RESET on this VCR to reset the counter to
"0H00M00S."
4
Rewind the prerecorded tape to the beginning of the section to be
replaced.
The VCR pauses.
5
Press AUDIO DUB.
The audio dubbing indicator
6
To start editing, press the P PAUSE buttons on this VCR and the stereo
system (or other VCR) at the same time.
When the counter reaches "0H00M00S," audio dubbing stops
automatically.
To stop while editing
Press the p STOP buttons on this VCR and the stereo system (or other VCR).
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the SET UP MENU (page 49). Use this feature to
listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is
set to ON, the AUDIO MONITOR button does not function. Remember to
reset AUDIO MIX to OFF after playing the tape.
52
Editing
COUNTER RESET
AUDIO DUB
appears in the display window.
SLV-X837AS 3-858-900-11 (1)
P PAUSE