Sony SLV-X837AS Operating Instructions Manual page 19

Disabling unwanted programme positions
After tuning the TV channels, you can disable unused programme positions.
The disabled positions will be skipped later when you press the PROG +/–
buttons. You can also disable unwanted programme positions using the SET
UP CH AND G-CODE menu (page 25).
1
In step 5 above, press programme number button "0" twice to display
the number "0" beside CHANNEL SET.
2
Press EXECUTE.
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1
Press PROG +/– to select the programme number for which you cannot
obtain a clear picture.
2
Press MENU, then select TUNER PRESET and press EXECUTE.
3
Select FINE TUNING. The fine tuning meter appears.
TUNER PRESET PROG
NORMAL / CATV NORM CATV
AUTO PRESET
CHANNEL SET 3 5
AFT ON OFF
FINE TUNING
SET :
4
Press CURSOR ?// to get a clearer picture, then press EXECUTE.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Note
• The menu disappears automatically if you don't proceed for more than a few
minutes.
14
SLV-X837AS 3-858-900-11 (1)
19
Getting Started