Sony SLV-X837AS Operating Instructions Manual page 14

Step 5 : Setting up the VCR with EASY SET UP (continued)
5
Using CURSOR >/./?//, set the G-CODE guide channels,
change the programme positions of the stations, and disable the
• CURSOR
unused programme positions. (If not necessary, skip this step.)
The setting procedures are the same as those described in "Manual
setup — Setting up G-CODE" on page 20 and "Manual setup —
Changing/disabling programme positions" on page 23.
6
Press EXECUTE.
• EXECUTE
The CLOCK SET menu appears.
Set the date and time using CURSOR
>/. /?//. The setting procedures
are the same as those described in
"Manual setup—Setting the clock" on
page 26.
7
Press EXECUTE .
• EXECUTE
A programme position appears on the TV
screen.
Note
• Do not exit EASY SET UP while the VCR is presetting channels. If you do, repeat
EASY SET UP from the beginning.
14
Getting Started
EASY SET UP
CLOCK SET
1 . 1 1 . 9 9 7 WED
SELECT :
SET :
END : EXECUTE
SLV-X837AS 3-858-900-11 (1)
1 2 3 – –
0 : 0 0
1