Table of Contents
Advertisement
Onboard Debug LED
Enables the onboard Debug LED feature.
Options: Enabled, Disabled.
Onboard I/O Chip Setup
Scroll to Onboard I/O Chip Setup and press <Enter>. The following screen appears:
POWER ON Function
Enables computer power on by keyboard, mouse, or hotkey activity.
Password:
Requires you to enter a password when using the keyboard
to power on. Set the password in the next field "KB Power ON
Password."
Hot KEY:
Enables you to use a hot key combination to power on the
(default)
computer. Set the hot key combination in the "Hot Key Power
ON" field.
Any KEY:
Enables you to set any keyboard activity to power on the computer.
Button Only:
Requires you to push the computer power button to power on
the system.
Keyboard 98:
Enables you to set the Windows 98 key to power on the system.
KB Power ON Password
Press "Enter" to create a password that is required when you use the keyboard to
power on the system. You must set the POWER ON Function to "Password" to be
prompted for a password at power on.
BIOS
Page 4-11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the NFORCE2 ULTRA 400 400 and is the answer not in the manual?