TYT TH-UV8000E User Manual page 24

3. Press , then press , if radio has saved last calling ID, it will
display this ID, if no, it is none, then key input DTMF code, 16 digits
in maximum, then press PTT to send this ID.
Note:
1. when key input code, press MONI to delete last digit, short press CALL to be back to
standby mode.
2. in MR mode or CH mode, long press CALL to get ID of respective channel of others.
3. when key input code, if you end it as #*, the code will be changed into XX#123, self ID is
123,eg,if input 78945#*,self ID is 123, you can call the radios with ID as 78945, whose LCD
will display DTMF, if you want to check self ID, please press
display ID.
DTMF selective call
1. Signal call
Code of calling part is 456(Radio A), and called one is 123(Radio B), press
and key input 1,2,3,#,*, then press PTT to call radio B.
After sending, LCD of radio B will display DTMF;
Press , then press , LCD of radio A will display
Note:
if radio A transmit 1,2,3 or 1,2,3,# or 1,2,3,#,X,X, radio B also can receive and decode.
41
, then press , LCD will
, then press
.
2. Group call
Code of calling one is 456, press , then press
transmit, the actual transmitting code is 1,1,A,#,4,5,6.
Key input by sequence
11A#* or 11A#456
15A#* or 15A#456
1AA#* or 1AA#456
5AA#* or 5AA#456
AAA#* or AAA#456
, then key input 1,1,A,#, press PTT to
The radios you can call
110*119(10 pcs)
150*159(10 pcs)
100*199(100 pcs)
500*599(100 pcs)
000*999(1000 pcs)
42