TYT TH-UV8000E User Manual page 18

settings separately in each memory.
Enter Menu 4 to set TX power.
th
High: 10W
Low: 5W, when you select Low power, the "L' icon will appear on the display.
5) Squelch Adjustment (SQL---MENU 5)
Functions: UV8000E 's Squelch system allows you to mute the background noise
when no signal is being received. Not only does the Squelch system "stan-
dby" operation more pleasant, it also significantly reduces battery current
consumption.
Enter Menu 5 to set SQL level. Default: 5.
th
6) Dual Wait/Standby (D.WAIT---MENU 6)
Functions: UV8000E Rallows you to receive the sub band signal even if you are working
on the operating band. It could monitor the signal under both master and
sub band at the same time.
Enter Menu 6 to set Dual Wait. Default: ON.
th
7) LED Display Mode (LED---MENU 7)
Function: select the LED/Keypad Lamp mode.
Enter Menu 7 to select LED display mode. Default: AUTO.
th
ON: LED display lights all the time.
AUTO: Illuminates the LED when any key is pressed and after 3s the light is off.
29
OFF: Disable the LED lamp.
8) Background Light Color (LIGHT---MENU 8)
Functions: choose LED background light color.
Enter Menu 8 to select background light color. Default: Default1.
th
1: Purple.
2: Orange.
3: Blue.
9) Keypad Beeper setting (BEEP---MENU 9)
Functions: enable/disable the keypad beeper.
Enter Menu 9 to set keypad beeper. Default: ON.
th
10) Automatic Number Identity (ANI---MENU 10)
Functions: sending ID code when UV8000E transmits, the others can receive it directly
on the display if they also have ANI function.
Enter Menu 10 to set ANI. Default: OFF.
th
11) Repeater frequency setting
Enter Menu 11 to turn on/off the setting.
th
12 ) ID setting
Enter Menu 12th to set the ID number.
13) PTT ID setting
Enter Menu 13th to set the PTT ID
30