Ow To Ttach Aumidifier - ResMed S8 Compact User Manual

338249r1.book Page 10 Friday, June 10, 2005 3:22 PM
H A
OW TO
A H
TTACH A UMID
Please refer to the illustration in section E of the illustration sheet, and your HumidAire 3i
manual.
H
The
UMID
humidification. No other accessories are required for its use.
Notes:
a. Make sure the water chamber of the HumidAire 3i is empty before you attach or
detach the humidifier.
b. Remove the connector plug on the S8 Compact (see section A of the illustrations
sheet) before you attach the HumidAire 3i. Reattach the connector plug firmly
after you detach the HumidAire 3i.
A H
TTACH A UMID
Please refer to the illustrations in section F of the illustration sheet.
To connect your
21" (52 cm) air tubing.
1
Fill the H
UMID
medium 21" (52 cm) and long 6'6" (2 m) air tubing (F-1), and close the humidifier lid.
2
Place the S8 C
the medium air tubing to the air outlet (F-3).
Note: To avoid water spilling into the S8 Compact, do not put it underneath the
humidifier.
3
Assemble your mask system and connect it to the free end of the long air tubing (F-4).
4
H
Plug the
UMID
cord to the socket at the rear of the
outlet.
Please refer to the HumidAire User's Manual for further details.
WARNING
!
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
The S8 C
OMPACT
10
H
TTACH A UMIDIFIER
A 3 H
IRE i UMIDIFIER
A 3i
attaches to the front of the
IRE
A H
IRE UMIDIFIER
S8 C to a H
OMPACT UMID
A water chamber and place inside the
IRE
on top of the H
OMPACT
A
power cord into a power outlet. Connect the
IRE
S8 C
is now ready for use with the
S8 C
to provide heated
OMPACT
A humidifier you need medium sized
IRE
H A
UMID IRE
A (F-2) and connect the free end of
UMID IRE
S8 C
and plug the other end into a power
OMPACT
H A .
UMID IRE
. Connect the
power
OMPACT