Table of Contents
Advertisement
Chapter 13
13 6
Remote Management
By default, the remote devices are not allowed to manage the modem router from the
Internet.
Follow the steps below to allow remote devices to manage the modem router.
1
Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2
Go to
Advanced
Management
section.
3
Tick the checkbox to enable
setting. Leave the
device to manage the modem router, you can enter the IP address of the remote
device in the IP/MAC Address field.
4
Click
Save
to make the settings effective. Now, all devices on the Internet
can log in to http://modem router's WAN IP address:port number (such as
http://113.116.60.229:80) to manage the modem router.
Tips:
1. You can find the WAN IP address of the router on
2. The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
13 7
System Log
System Log can help you know what happened to your modem router, facilitating
you to locate the malfunctions. For example when your modem router does not work
properly, you will need to save the system log and send it to the technical support for
troubleshooting.
1
Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2
Click
Advanced
>
>
System
Tools>
Remote
IP/MAC Address
field blank. If you just want to allow a specific
Basic
System Tools
>
System Log
Administration
page. Locate the
Management. Keep the
>
Network Maps
> Internet.
Set up a Dynamic DNS Service Account
page.
Administrate Your Network
Remote
Port
as the default
if you want to log
89
Hide quick links:
Advertisement
Table of Contents
