Table of Contents
Advertisement
Chapter 12
8 ) Enter the
Pre-Shared Key
keep
Perfect Forward Secrecy
Note:
The key should consist of visible characters without blank space.
Make sure Site A and Site B use the same key.
9 ) Leave the
Advanced
OK
to save.
3 Configuration on Site B (remote network). Refer to step 2
configuration on Site A and make sure that Site A and Site B
use the same
pre-shared keys
settings.
4 The
Status
column will change to
has been set up successfully.
5 Check the VPN connection. You can ping site B' LAN IP
from your computer in site A to verify that the IPSec VPN
connection is set up correctly.
Tips: To check the VPN connection, you can do the following.
On the host in Site A, press
and hit
OK.
a . In the CLI window, type in "ping 192.168.2.x" ("192.168.2.x"
can be IP address of any host in Site B). Then press [Enter].
Specify Your Network Settings
for IKE authentication. Then
enabled.
Settings as default value. Then click
and
Perfect Forward Secrecy
UP
if the VPN connection
[Windows Logo]
+
[R]
to open Run dialog. Input "cmd"
80
Hide quick links:
Advertisement
Table of Contents
