TP-Link Archer D20 User Manual page 24

Chapter 5
I want to:
Tips:
How can I
do that?
Use an independent bandwidth and enjoy a good Internet
experience without being affected by other users who are
sharing the same router.
For example, my roommate and I share 512Kbps Upstream
Bandwidth and 8Mbps Downstream Bandwidth via this router,
she likes to watch live show and play online games, which may
take up much bandwidth. I don't want to be affected, so we
agree to equally distribute the bandwidth. Our IP addresses are
192.168.1.101 and 192.168.1.110.
To use the bandwidth control feature, you'd better set static
IP Address on each computer to be controlled or configure
Address reservation on the modem router in order to manage
easily. About how to configure address reservation, please refer
to Reserve LAN IP Addresses.
1 Visit http://tplinkmodem.net, and log in with the password
you set for the modem router.
2 Go to
Advanced >
3 Enable Bandwidth
you don't know how to choose the line type, please contact
your ISP which line type you have access.
4 Enter the
Total Upstream Bandwidth
Bandwidth given by your ISP. (1Mbps=1024Kbps). Click
to save the settings.
5 Click Add to add controlling rules for each computer
respectively.
Bandwidth Control page.
Control, choose DSL
and the
Bandwidth Control
on the line type. If
Total Downstream
Save
20