SETTING UP YOUR VT 1970ci DIGITAL ANSWERING DEVICE
Set Announce Only
•
Press the MENU key 5 times until
"SET ANNOUNCE
you hear:
ONLY"
•
Now press SELECT . The voice
prompt will say either OFF or ON.
Repeated presses of SELECT will
alternate between ON and OFF.
The Base Unit will display either
ON or OF (off) to reflect your
choice.
•
Choose OFF if you want your VT
1970ci to record your callers'
messages (Normal Answering
Mode).
•
Choose ON if you only want your
callers to hear your greeting with-
out allowing them to leave you a
message (Announce-Only Mode).
•
Once you've selected OFF (or
ON), press TIME/SET to confirm
your selection. The voice prompt
will say:
"ANNOUNCE ONLY IS
OFF (or ON)".
You can now program the other 6
functions.
vt1970ci/hjmannual
Set Outgoing Message
•
Press MENU until you hear "Set
Outgoing Message".
•
Press MEMO . The voice prompt
will say "Now Recording", followed
by a tone.
•
Begin speaking after the tone,
towards the front edge of the Base
Unit. The Base Unit display be-
comes a timer as you record your
outgoing message.
•
Your outgoing message must be
longer than 2 seconds.
MENU
SELECT
NOTE:
TIME/SET
Your outgoing message can be up to
90 seconds.
•
When done, press PLAY/STOP .
Your outgoing message will auto-
matically be played back.
31
31
MENU
MEMO
PLAY/STOP
1/29/99, 12:50 PM