Table of Contents
Advertisement
installation
7. Once alignment is achieved , fit the domed
headed nuts.
8. Fit the covers at the top of the domed
headed nuts.
9. Insert the washers, if the thickness of the
aesthetic door is between 15-18mm.
10. Open the fridge door and screw the
bottom of the aesthetic door to the lower
connecting block. Remember to drill the
holes Ø2.8 mm to a depth of 10 mm.
Domed Headed
Nuts
Fridge Door
Cover
Fridge Door
Washer
Fridge Door
Ø2.8 mm
10mm
screw
Aesthetic
Door
Washer
Aesthetic
Door
Aesthetic
Door
13
Advertisement
Table of Contents
