Hyundai HTX927 User Manual page 65

ENG
Tuner Operation:
• AM/FM switch.
• Mono/Stereo switch in FM mode.
• After having selected a station and tuned a new frequency, press [MEMORY] to save
the frequency.
• Automatic searching and presetting in FM/AM tuner mode.
• Press the digital button to choose a preset station, you must input
two digital key to select a station. For example, if you select 02
station, you must press [2] .
if you select the 15 station, you must press [1] and[ 5].
• Searching with frequency up.
• Searching with frequency down.
• Skip forward a station.
• Skip backward a station.
Under Tuner mode, you can press [A_MODE] to change the stereo input to
5.1CH output. At the same time, [VOLUME+/-], [CH_LEVEL], [MUTE],[TONE] and
[S.EFFECT] buttons are available, please refer to the PLAY chapter for details.
• RDS functions are only available in areas that use RDS system.RDS (Radio Data
System)is a broadcasting service that allows FM stations to send additional information
along with the regular Fm radio signal.This addition a information can contain the fol-
low-ing: Station Name Radio Text Frequency
When an RDS Radio station is received,the RDS station name will appear on the dis-
play.While receiving an RDS radio station,you can change the display information by
pressing RDS on the remote control repeatedly.
Note:if the tuned station is not transmitting an RDS signal or not an RDS station,NO
RDS will be displayed.
ENG - 65