Hyundai HTX927 User Manual page 60

VIDEO SETUP PAGE:
COMPONENT VIDEO:
OFF: Set video output to the composite.
YUV: Set video output in analog component video format when connecting to Y/U/V terminals.
P-YUV: Set progressive YUV signals. Connection same as YUV.
RGB: Set video output in Red/Green/Blue format when connecting to SCART terminal.
P-RGB: Progressive RGB signals. Connection same as RGB.
Note:
If the video setting differs with the physical connection, the TV set may not have picture. In this
case, you can RESET the machine, then keep pressing key [V_MODE] until the picture returns
again.
COLOR SETTING SETUP:
COLOR SETTING includes: SHARPNESS, BRIGHTNESS, CONTRAST,
GAMMA, HUE, SATURATION and LUMA DELAY .
Adjust each item in the Color Setting to get the suitable color output of the TV screen.
SHARPNESS: There are three optional output modes: HIGH\MEDIUM\LOW.
BRIGHTNESS: Use the left/right direction key to move the scroll and adjust the brightness.
CONTRAST: Use the left/right direction key to move the scroll and adjust the contrast.
GAMMA: There are four optional output modes:
HIGH\MEDIUM\LOW\NONE.
HUE: Use the left/right direction key to move the scroll and adjust the hue.
SATURATION : Use the left/right direction key to move the scroll and adjust the saturation.
LUMA DELAY: In this item you can choose 0T or 1T .
ENG - 60