Hyundai HTX927 User Manual page 64

• When playing DVD, VCD, CD disc, press [A-B] button to repeat a certain con-
tents.
Press [A-B] key on the start point (A) and the ending point (B) to select the
repeat part.
Press [A-B] the third time, cancel A-B repeat and return to normal play.
• When playing DVD, VCD or CD disc, press [ ]button once, the unit will memori-
ze the previous ending point. Press[ ]button to go on the play. Press[ ]button for
the second time to stop the play and end memory.
PLAY PICTURE CD DISC
Press [ ], 12 small pictures will show on the TV screen.
Press direction key to select the desired picture.
Use direction key to select SLIDE SHOW, then press [ENTER] to start random play.
Use direction key to select MENU, then press [ENTER] to enter instruction menu.
Instruction menu as follows:
[PROGRAM]: to change picture transform mode, [ ]: entering picture preview mode, [
ous picture, [ ]: next picture, [ ]: to play picture, [UP]: mirror image in vertical, [DOWN]: mirror
image in horizon, [LEFT]: rotate 90 degrees anticlockwise, [RIGHT]: rotate 90 degrees clockwi-
se, [ZOOM]: change zoom mode, [ ]: zoom in the picture, [ ]: zoom out the picture (Before
zoomin /out a picture, please first press [ZOOM] button), [UP/DOWN/LEFT/RIGHT]: move zoom
center. Select CONTINUE to exit.
LINE INPUT OPERATION:
This unit has two group extra line input terminals. You can input the analogue stereo audio sig-
nals from extra device such as DVD, CD, TAPE PLAYER, and process the input signal to meet
your preference.
Under LINE INPUT mode, you can press [A_MODE] to change the stereo input to 5.1CH output.
At the same time, [VOLUME+/-], [CH_LEVEL], [MUTE],[TONE] and [S.EFFECT] buttons are
available.For details, please refer to the PLAY chapter.
ENG - 64
]: previ-