Hyundai HTX927 User Manual page 59

ENG
DIGITAL AUDIO SETUP PAGE:
• DIGITAL OUTPUT:
SPDIF OFF: No digital output(optical or coaxial off), only analog audio output.
ALL: If this item is selected, you can set up RAW.
PCM ONLY: In SPDIF/PCM mode, setup PCM channel according to your preference.
• LPCM OUT :
Select PCM frequency at 48kHz or 96kHz.
Note: Some amplifiers don't support 96kHz sampling which will effect the coaxia/opticall output.
• DOLBY DIGITAL SETUP:
• DUAL MONO:
Stereo: Set audio output to the stereo output.
L-mono: Set audio output to the mono-left channel.
R-mono: Set audio output to the mono-right channel.
Mix-mono: Set audio output to the mix-mono channel.
DYNAMIC:
• Select this to reduce the overall volume and still keep defined audio sound.
You can press up and down direction key to adjust it.
System Setup
CHANNEL DELAY PAGE:
If the above setup dissatisfy you, you can set the speaker distances in the
real conditions. Press up/down direction key to select the speaker, and
press left/right direction key to adjust the distance.
EQUALIZER:
In this item you can set sound mode, bass boost, super bass ans treble
boost. You can select one according to your preference and the disc
content.
3D PROCESSING:
In PROLOGIC ON mode, the reverb mode setup is available.
HDCD SETUP:
You can select the digital filter at off,1x and 2x.
KARAOKE: (No this function in some types of machine)
KARAOKE can be controlled to output by the setup menu. There are 2 optional output modes:
ON/OFF.
MIC
Adjust microphone volume to the minimum level. Insert microphones into the microphone jacks
on the front panel. The two microphones can be used in the same time.
MIC VOL
Use the microphone volume knob to adjust the microphone volume.
Or press up/down direction key to adjust its volume in the setup menu.
When playing karaoke disc, to eliminate the original singing, press [L/R/ST] key on the remote
controller to select left channel or right channel. When playing DVD disc, press [AUDIO] to elimi-
nate its original singing.
ENG - 59