Toshiba E-STUDIO 350 User Functions Manual page 103

3
Specify following items as required and
press the [ENTER] button.
- PROTOCOL — Select whether the SMB protocol is enabled or
disabled. When you want to enable the SMB protocol to enable
the Save as file to network folder using SMB and sharing the
"FILE_SHARE" folder of this equipment, but not to enable the
SMB printing, press the [DISABLE PRINT SHARE] button.
- [NetBIOS NAME] — Press this button to enter the Windows
computer name of this device if this device is connected to the
Windows network. This must be specified when you want to
enable SMB printing.
- [WORKGROUP] — Press this button to enter the Windows
workgroup name if this device is connected to the Windows
network. This must be specified when you want to enable SMB
printing.
- [WINS PRIMARY] — Press this button and enter the IP address
of the primary WINS server using the digital keys if required.
- [WINS SECONDARY] — Press this button and enter the IP
address of the secondary WINS server using the digital keys if
required.
When you press the [NetBIOS NAME] and [WORKGROUP]
buttons, the input screen is displayed. Enter the value using the
keyboard and digital keys, and press the [ENTER] button to set the
entry.
- Do not use any characters other than alphanumeric characters
and "-" (hyphenation) for NetBIOS NAME. If you use any different
characters, the equipment uses default NetBIOS name.
- Do not use any characters other than alphanumeric characters
and following symbols (; : " < > * + = \ | ? ,) for WORKGROUP. If
you use any different characters, the equipment uses default
Workgroup name.
- Do not enter an IP address that starts with "0" (i.e. "0.10.10.10"),
"127" (i.e. "127.10.10.10"), and "224" (i.e. "224.10.10.10"). If you
enter such an address, the equipment cannot communicate with
the WINS server.
- If you enter "0.0.0.0" for [WINS PRIMARY] and [WINS
SECONDARY], this equipment will not use the WINS server.
- When [DYNAMIC] or [NO AUTO IP] is selected for the Address
Mode in the TCP/IP setting, this equipment can obtain the IP
address for [WINS PRIMARY] and [WINS SECONDARY] from
the DHCP server. However, if you enter the IP address for them
manually here, this equipment will use the entered IP address
instead of the IP address that is obtained from the DHCP server.
4
101