Toshiba E-STUDIO 350 User Functions Manual page 151

REPORT SETTING
Function
RECEPTION LIST - RELAY STATION
*1.These are printed only when the optional Fax unit is installed.
NETWORK SETTINGS - GENERAL PRODUCT - GENERAL
Function
NIC ROM VERSION
ETHER SPEED
NIC CONFIG CHANGE COUNT
NIC MEMORY SIZE
NETWORK SETTINGS - NETWORK
Function
TCP/IP - ADDRESS MODE
TCP/IP - IP ADDRESS
TCP/IP - SUBNET MASK
TCP/IP - DEFAULT GATEWAY
TCP/IP - HOST NAME
TCP/IP - DOMAIN NAME
IPX/SPX - ENABLE IPX/SPX
IPX/SPX - FRAME TYPE
IPX/SPX - ACTUAL FRAME TYPE
IPX/SPX - ENABLE NCP BURST
APPLE TALK - ENABLE APPLE TALK
APPLE TALK - LEVEL
APPLE TALK - DEVICE NAME
APPLE TALK - DESIRED ZONE
Description
Shows whether a reception list will be printed
or not after receiving a relay transmission
from an originator as a relay hub.
Description
Shows the software version of the NIC.
Shows the Ethernet speed setting.
Shows how many times the NIC
configuration has been changed since
turning on the power of the equipment.
Shows the memory size of the NIC.
Description
Shows the TCP/IP address mode.
Shows the IP address of this equipment.
Shows the subnet mask of this equipment.
Shows the default gateway address of this
equipment.
Shows the host name of this equipment.
Shows the domain name of this equipment.
Shows whether the IPX/SPX protocol is
enabled or disabled.
Shows the frame type to be selected.
Shows the actual frame type.
Shows whether the NCP Burst function is
enabled or disabled.
Shows whether the AppleTalk protocol is
enabled or disabled.
Shows the AppleTalk level number of this
equipment.
Shows the AppleTalk device name.
Shows the AppleTalk zone.
User
NO
User
NO
NO
NO
NO
5
User
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
149