Table of Contents
Advertisement
Quick Links
nm200/nc300 series
operating manual
read and save these instructions
caution
to reduce the risk of fire, electric shock, or
injury to persons, observe the following:
1. Read all instructions carefully before installing or using the
NM200/NC300 System.
2. The NM200/NC300 must be installed by a qualified dealer or
installer, and must conform to all local building and electrical
codes.
3. Adhere to all warnings on the NM200/NC300 and in
these instructions. Follow all operating and installation
instructions.
warning
• Do not expose the NM200/NC300 to moisture. Doing so can
create fire or shock hazards and void the warranty.
• Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage
or other hazards and will void your warranty. Neither the
Master Station nor the Remote Stations contain any user-
serviceable parts. REFER ALL SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to
constitute a risk of shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
• Use only NuTone replacement parts and have them installed
by a NuTone dealer or installer. Unauthorized substitutions
can result in fire, electric shock, or other hazards.
• Upon completion of any service or product repair, have the
NuTone dealer or installer conduct a safety check to ensure
the system is in proper operating condition.
• Use only a damp cloth to clean the Master Station, Remote
Stations, Door Stations, and speakers. Do not use liquid
cleaners or aerosol cleaners.
models nm
system overview
The NM200 is an intercom and sound system designed for
today's home. Its compact size and modern, elegant look
complement any décor. The NM200 offers more than just
sensible good looks. It gives you peace of mind as it allows you
to communicate with family members and monitor specified
rooms. The NM200 offers high quality sound throughout your
home from several sources, including the radio, CD player, or
other connected audio sources in your home.
Please read all of the safety instructions before changing any
settings on your NM200.
Keep this manual in a safe place for future reference. If you
lose the manual, you can download it from the NuTone web site
(www.nutone.com).
The NM200 System consists of three major components:
• Master Station
• Indoor/Outdoor Remote Station—You can install up to 9
Remote Stations in individual zones, 15 Remote Stations in
shared zones, including 2 Outdoor Remote Stations.
• Door Station—You can install up to 3 Door Stations.
master station
The Master Station gives you control over the system intercom
and music capabilities. System setup is established at the master.
These settings include: set the clock and establish music auto
on/off times, select the system music source, save preset radio
stations and set the scan mode. System volume, loudness,
treble and bass can also be controlled from the NM200 master.
Intercom functionality for each Remote Station is established
at the master by setting the intercom selector switches. Each
room can be set to Intercom Only, Radio and Intercom, Off, or
Monitor.
The NM200 provides the ability to monitor other stations and
communicate with Door Stations. System functionality can also
be established to provide for Monitor Override and Security/
Home Automation features.
indoor/outdoor remote stations
The Remote Stations provide intercom functions and system
music control capabilities. Depending on the room configuration
at the Master Station, a Remote Station can communicate
with or monitor other stations and communicate with the Door
Stations. The system's music can be turned on and off, music
volume adjusted, and music sources changed from the remote
stations.
200
300
• nc
Page
Advertisement
Table of Contents
Related Manuals for NuTone nc300
Summary of Contents for NuTone nc300
-
Page 1: System Overview
1. Read all instructions carefully before installing or using the NM200/NC300 System. 2. The NM200/NC300 must be installed by a qualified dealer or installer, and must conform to all local building and electrical codes. 3. Adhere to all warnings on the NM200/NC300 and in these instructions. Follow all operating and installation instructions. warning • Do not expose the NM200/NC300 to moisture. Doing so can create fire or shock hazards and void the warranty. • Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards and will void your warranty. Neither the... -
Page 2: Door Station
You can select from four music sources: • AUX—Any audio source you connect, such as an external CD player or a stereo system. • AM radio • FM radio • CD player (NC300 CD player). This source can also be used to hook up an external audio device if the system does not include a NC300 CD player. For CD functionality, see Master Station Operation/CD Player Operation. To select a music source: 1. Press POWER to turn on music. 2. Press SOURCE repeatedly to cycle through AUX, AM, FM, and CD until you reach the music source you prefer. music auto on/off You can set the system to turn music on automatically at a predetermined time and to turn the music off automatically at a predetermined time. - Page 3 preset radio stations To preset radio stations: 1. Press POWER to turn on the music. 2. Select FM or AM. See Music Settings/Music Source for instructions. 3. Use TUNE UP or TUNE DOWN to find a station. See Tune the Radio section for seek and scan functions. 4. Simultaneously press TUNE UP and TUNE DOWN to enter Store Preset mode. The display shows PRESET and a preset number. 5. If you don’t want to assign a preset number, wait 5 seconds and your selected radio station will automatically be assigned to the preset number that is displayed. If you want to select the preset number, press the PRESET button repeatedly to cycle through numbers 1-8 until you reach the preset number you want. 6. Wait 5 seconds. The display updates to show the new station for the selected preset number.
-
Page 4: Display Brightness
Note: When music is off, use VOLUME UP and VOLUME DOWN to adjust Master Volume. 3. Press TONE. The Loudness function appears. Press VOLUME UP to turn Loudness on. Press VOLUME DOWN to turn Loudness off. 4. Press TONE. The Treble function appears. Use VOLUME UP and VOLUME DOWN to adjust the treble from 0-14. 5. Press TONE. The Bass function appears. Use VOLUME UP and VOLUME DOWN to adjust the bass from 0-14. 6. Press TONE. Intercom Volume appears. Use VOLUME UP and VOLUME DOWN to adjust the Intercom Volume from 0-29. -
Page 5: Intercom Operation
• Other Remote Stations cannot listen to the room. • The room cannot receive music or intercom-related audio. • The room cannot be monitored. • The station does not hear the door chime and cannot talk and listen to the Door Station. monitor When a station is set to Monitor: • Any station set to Radio/INT can continually hear all sound and activity in the room. • You can communicate with other remote stations. • The room cannot hear the door chime. • You can talk to the Door Station, but will not be able to listen to it. • The room cannot receive music. • Other rooms can talk to a monitored station, if the monitor override is set to On. -
Page 6: Door Station Functions
• Talk Talk to all remote stations set to Intercom or Radio/INT. • Privacy Press in PRIVACY button to disable Listen and Monitor functions. • Speaker Volume Use Speaker Volume knob to adjust the remote speaker volume. • Music Volume turn music source on and off You can turn the Music Source on and off from any Remote Station. To turn the Music Source on, press and hold the MUSIC VOLUME UP button. - Page 7 cd functions • Select Mode Available modes: - Normal: Play CDs and tracks sequentially - Repeat Song: Repeat current track - Repeat Disc: Repeat current disc from beginning - Random Disc: Randomly play tracks on current disc - Random All: Randomly play tracks from all CDs Press and hold MODE button to display total length of time and total number of tracks on current CD. • Next Disc Play the next disc. Press and hold to display elapsed time of current track. Disabled in Random All mode. • Previous Track Play previous track or restart current track. Hold to reverse through current track. Disabled in Random Disc and Random All modes. • Play/Pause Press to pause CD. Press again to play. • Next Track Play next track. Press and hold to fast forward through current track. In Random Disc mode, player selects a random track from the current disc. In Random All mode, player selects random tracks from all discs. models nm • nc Page ...
- Page 8 Ud.puede tener otros derechos, los cuales varían de estado a estado. Esta garantias reemplaza a todas las garantías anteriores.. SERVICO DE GARANTÍA: Para tener derecho al servicio de garantía, Ud. debe (a) Notificar a Broan-NuTone a la dirección o el número de teléfono abajo, (b) indicar el número de modelo y la identifación de la party y (c) describir la naturaleza de cualquier defecto en la producto o parte.