Data Exchange - TrekStor t-series Manual

4) Use of the integrated USB hub (optional)
EN
Some models allow you to directly connect different USB devices to your DataStation. Corresponding connections can be found
on the front.
• Connect the desired USB device with one of the USB ports in the USB hub.
• Follow the manufacturer's instructions to separate the USB device from the USB hub.
Note: To use the integrated USB hub, the DataStation must be turned on and connected to your computer.

5) Data exchange

After successful startup of the device, a local disk "t
With models that have an installed card reader, up to 4 additional card reader drives are displayed as a "r
• Select the desired files or folders with your mouse.
• Position the mouse pointer over the selected files or folders, and press the right mouse button. Select "
menu that appears.
• Under " m
y computer
• Click it with your right mouse button, and select "
on the target drive.
" / "D ", select the desired goal (such as the "t
esktop
s " appears under "m
rek tor y computer
s
rek tor
p " to start copying. After copying is completed, the data will be available
Aste
– 12 –
" (Windows®) or on your "D
emovAble Disk
" drive).
" (Mac® OS X).
esktop
".
c " from the context
opy