TrekStor t-series Manual page 11

Note: TrekStor strongly recommends that its customers always insert both USB plugs. Insufficient power which may occur when only
one plug is inserted can cause data loss or even mechanical failure of the hard disk. TrekStor assumes no liability or warranty for
damage to the DataStation arising from insufficient power.
3) Use of the integrated card reader (optional)
Some models allow you to directly connect different memory cards to your DataStation. The following memory cards are supported:
CF - Compact Flash Card type I / II, MD – MicroDrive, MMC - Multimedia Card, MS - Memory Stick, MS duo - Memory Stick Duo
(only with an adapter), MS duo pro - Memory Stick Duo Pro (only with an adapter), MS pro - Memory Stick Pro (only with an adapter),
SD - Secure Digital Card, XD Card
To use the memory card, insert it into the provided card slot.
Note: Memory cards can be removed without first logging off from
the installed card reader, but never remove the card while data is
being transmitted to prevent data loss or damage.
– 11 –
EN