Bosch PFS 105 E Original Instructions Manual page 19

OBJ_BUCH-420-003.book Page 19 Monday, October 14, 2013 2:59 PM
Problem
Spray material drips from the
nozzle
No spray material emerges from
the nozzle
Maintenance
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
After-sales Service and Application Service
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Bosch Power Tools
Cause
Build-up of spray material on nozzle 11 and
air cap 2
Nozzle 11 worn
Nozzle 11 loose
Control knob 16 for air-flow control turned
too far to the left
No pressure build-up in container 8
Suction tube 10 loose
Nozzle 11 clogged
Suction tube 10 clogged
Ventilation hole on suction tube 10 clogged Clean the suction tube and the ventilation
Spray material too viscous
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
English | 19
Corrective Measure
Clean nozzle and air cap
Replace nozzle
Tighten union nut 3
Turn control knob 16 toward the right
Screw container firmly against spray gun
Insert suction tube properly
Clean nozzle
Clean suction tube
hole
Thin down the spray material by 10% again
and carry out a test-spray run
1 609 92A 0BR | (14.10.13)