Making A Dmo Group Call; Receiving A Dmo Group Call; Exiting Dmo - Motorola MTP850 Basic User's Manual

In DMO it is only possible to place the following call types:
Group Calls, Emergency Group Calls and Private Half-duplex
Calls.
When you start a call, the members of the selected group who have
their units turned on will receive the Group Call.
In DMO the MTP850 can communicate with the trunking system
(and vice-versa) if the Gateway option is enabled in the MTP850.

Making a DMO Group Call

1. Enter Direct Mode by pressing Optns and selecting Direct
Mode.
2. Make sure that you have selected the required group. Press and
hold the PTT button.
3. Wait for the talk permit tone and then speak into the microphone.
Release the PTT button to listen.

Receiving a DMO Group Call

You can receive a DMO Group Call only when your MTP850 is in
DMO. Unless it is engaged in a call, your MTP850 will receive the
Group Call. To answer the call, press and hold PTT. Your MTP850
shows the group name and the caller's private number or alias if
previously stored in your contact list.

Exiting DMO

To exit DMO, press Optns and select Trunked Mode.
35