Charging The Battery; Battery Capacity Information; Attaching The Antenna - Motorola MTP850 Basic User's Manual

Charging the Battery

Motorola approved chargers provide optimum performance. Other
chargers may not fully charge your Motorola Lithium-Ion battery or
may reduce the life of the battery.
The MTP850 can be either On or Off during charging.
1. Insert the connector on the charger into the socket at the base of
the MTP850. Select the required plug adapter (UK or European
type) and connect to the charger. Then plug the charger into a
suitable mains socket.
2. The MTP850 displays the Charger Connected message only if
the MTP850 is On when connecting the charger. If the MTP850
is Off, the display shows an icon of the battery in charging.
The Battery icon shows the charging status (see below).
Empty
Battery Capacity

Battery Capacity Information

Information
Green icon
Yellow icon
Red icon
Empty icon
Low battery message

Attaching the Antenna

Turn the MTP850 Off before installing or removing the antenna.
Insert the bottom of the antenna into the screw-in base on the top of
the MTP850. Turn clockwise until snug. Do not force.
26
Full Empty
Battery Charge Progress
Description
Full (50% – 100% capacity)
Middle (20% – 50% capacity)
Low (10% – 20% capacity)
Very low (5% – 10% capacity)
Less than 5% capacity
Full