Product Features; Output Panel; Control Panel Features - Numark PT-01 Quick Start Owner's Manual

PRODUCT FEATURES

1. Platter: Place your record on the platter.
2. Control Panel: Please see the alternate detailed
section on the control panel features.
3. On Board Speaker: Use this speaker to listen to the
audio.
4. Tone Arm Clip: Use this clip to secure your tonearm
when storing and transporting the unit.
5. Tonearm: This unit comes with a ready to use pre-
balanced tonearm and cartridge. The cartridge is user
replaceable with parts from your distributor located in
the warranty guide. The platter starts spinning once
the tonearm is lifted over the record.
6. 45 Adapter: Use this adapter with 45 rpm records.

OUTPUT PANEL

1. Power Switch: Use this switch to turn the power on and
off.
2. AC In: This turntable is designed to work with either
batteries or the power supply cord that comes with it.
While the power is switched off, plug the power supply
into the turntable first, then plug it into the wall power
outlet, then switch on. NOTE: This unit can also be
powered by 6 "D" Cell batteries (Not Included).
3. Master Output (RCA): This "line level" output is for
connecting to the input of an external audio device
such as a DJ mixer, tape recorder, CD Burner, PA

CONTROL PANEL FEATURES

1. Audio Level Control: This rotary control adjusts the
volume level of the onboard speaker, headphone and
line out outputs. NOTE: Make sure the Audio Level
Control is set to OFF when connecting any alternate
audio output devices.
2. Tone Control: This feature allows you to adjust the low
and high frequency audio levels.
3. Pitch Control: This knob adjusts the pitch of the music
+/- 10%. In the center position the pitch is at 0%.
PITCH
RPM
POWER
33 45 78
-10%
7. Dust Cover: This cover protects the turntable from
dust and abuse while not in use or while in transport.
8. Dust Cover Latch: This latch holds the dustcover
securely in place, and can easily be opened by sliding
it to the left.
9. Carry Handle: Use this handle easily remove the unit
from record crates and bags, as well as carrying it in
transport.
10. Battery Cover: This holds the batteries securely in
place during use and transport. It easily slides open
and closed as indicated on the cover itself. NOTE:
This unit uses 6 "D" cell batteries (not included). They
should be installed in the proper direction indicated
system, powered speaker, or a home stereo. The level
of the master stereo output signal is controlled by the
audio level control.
4. 1/8" Headphone Jack: Use this jack with the 1/8" mini
headphone plug. NOTE: Be sure the volume control is
set to the OFF position before plugging in any
headphones to avoid permanent hearing damage.
5. 1/4" Headphone Jack: Use this jack with the 1/4"
headphone plug. NOTE: Be sure the volume control is
set to the OFF position before plugging in any
headphones to avoid permanent hearing damage.
TONE AUDIO
+10% LOW HIGH OFF
NOTE: In order for the pitch to be adjusted, the tempo
also changes according to what the pitch setting.
4. RPM Selection Switch: This switch selects the RPM of
the turntable platter -- 33, 45, and 78 RPM.
5. Power LED: This LED indicates that the power switch
on. Make sure the power is off when storing or
transporting the unit, to avoid wasting battery power.