Subscribe to Our Youtube Channel
Related Manuals for Numark PRO TT-2
Summary of Contents for Numark PRO TT-2
- Page 1 Professional Disc Jockey Products PRO TT-2 PROFESSIONAL DIRECT DRIVE TURNTABLE OWNER’S MANUAL ©2000 Industries http://www.numark.com...
-
Page 2: Safety Instructions
PRO TT-2 Turntable Safety Information SAFETY INSTRUCTIONS Read Instructions - All the safety and operating instructions should be read before this product is connected and used. Retain Instructions - The safety and operating instructions should be kept for future reference. -
Page 3: General System Precautions
If they malfunction (usually because of a dirty or dusty environment) Never attempt to make any adjustments or repairs other than those described in this manual. Take the PRO TT-2 to your dealer or to an authorized Center. -
Page 4: Introduction
You are now the owner a turntablist. This unit has been designed by DJs for DJs. With its super high-torque platter and large back lit display the PRO TT-2 gives the professional absolute total control. Enjoy this turntable and remember: BE CREATIVE! -
Page 5: Table Of Contents
• 45-rpm adapter • Counterweight • Headshell Product Registration PURCHASED FROM:_________________________ DATE OF PURCHASE:________________________ - The Leader in DJ Technology - 5 - PRO TT-2 Turntable Page 2 Page 4 Page 5 Page 6 Page 10 Page 11 Page 12... -
Page 6: Diagram And Parts Description
To fully appreciate the features of the PRO TT-2 should be placed on a level sturdy surface. Keep in mind that there are a few features you may never have seen before on a turntable of this type that you will need to read about to use properly. -
Page 7: Tone Arm Assembly
Attach now by sliding the counterweight onto the rear of the tonearm. Twist it lightly and it will screw onto the rear shaft of the tonearm. - The Leader in DJ Technology - 7 - PRO TT-2 Turntable http://www.numark.com... -
Page 8: Lcd Display
PRO TT-2 Turntable TONE ARM SETTINGS The following explains proper counterweight and anti-skating set up. Cartridge manufacturers usually specify the proper settings. a) Remove the stylus protector, do not touch the stylus tip during the adjustment. b) Set the cueing lever to the lower position so it does not effect tone arm height. -
Page 9: Rear Panel Diagram
REAR PANEL DIAGRAM 34. Removable Lid - Protects the turntable from dirt and dust. 35. Hinge Assembly - Holds the lid and turntable together. Attach now by sliding the bottom tabs of the Hinge Assembly into the Hinge Holders. 36. Platter Speed Output - This output is to be used with external devices that require platter speed information. -
Page 10: Operating Instructions
2. Turn on and raise the target light for illuminating the stylus tip by pushing the target light button. 3. Place a record on the turntable mat. When playing a 45rpm record with a large center hole; place the 45- rpm adapter on the center spindle. -
Page 11: Specifications
20mm 0-4g 0-7g 6-10g AC110-127V / 220-240V, 50/60Hz 15 Watts 450 x 352 x 148.5 mm 17 3/4” x 13 3/4” x 5 7/8” 12.45Kgs 27.5 lbs. - The Leader in DJ Technology - 11 - PRO TT-2 Turntable http://www.numark.com... -
Page 12: Limited Product Warranty
What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (2) Years.
Need help?
Do you have a question about the PRO TT-2 and is the answer not in the manual?
Questions and answers