Table of Contents
Advertisement
CDN-32SE
RELAY PLAY
1.
Press the RELAY-FADER START button while CDs are in both sides of the unit.
2.
Put both sides in SINGLE play mode while learning this function.
3.
Press play on PLAYER A of the unit. When that PLAYER A has finished play it will send a signal to PLAYER B to start play. You will see
PLAYER B start play and PLAYER A pause and cue to the beginning of the next track. When PLAYER B has completed play PLAYER A will
start.
In relay mode the play command is sent at the end of specified play. If the unit is in SINGLE mode the play command will start at the end of the
track. If the unit is in CONTINUOUS mode the play command will be sent at the end of the full CD. Two CDs will play continuously, alternating from
side to side. This feature will also work in program mode; however, if the sides are also in SINGLE mode the same number of tracks programmed
should be the same. Play will stop at the end of the last track.
FADER-START MODE
This mode is achievable by attaching both sides of your CD player to a similarly equipped DJ mixer.
1.
Connect cables between the CD remote unit and your DJ mixer.
2.
Active the RELAY-FADER button.
3.
Follow the directions in your mixer manual
Typically if you move the crossfader toward the active channel, the attached CD player will activate. When it is moved away that side will cue,
(similar to pressing the cue button).
©2001 Numark Industries
- The Leader in DJ Technology
- 12 -
http://www.numark.com
Advertisement
Table of Contents
